DENSITY FUNCTIONAL FOR STRUCTURES OF COLLOIDS CONFINED IN A SLIT-LIKE PORE

A density functional theory is applied to calculating the local density profiles of colloids confined in a slit-like pore as well as the radial distribution functions of bulk colloids. The interaction between the colloidal particles is described using a hard-core Yukawa model. The excess Helmholtz energy functional is a combination of the modified fundamental measure theory of Yu and Wu （2002） for the hard-core contribution and a corrected mean-field theory for the attractive contribution. Comparison with the results from the Monte Carlo simulations shows that the corrected theory improves the density profiles of colloids in the vicinity of contact over the original mean-field theory. Both the present corrected theory and simulations suggest that there are depletion and desorption for the colloid with strong attraction between particles at low temperature.     

山地输电线动刚度计算及模态分析

为了揭示地形变化对连续档输电线动态特性的影响，本文提出了基于任意高差角的动刚度理论．首先将单档导线视为连续档导线的子结构，构建了两悬挂点不等高的单档导线振动方程，并在该理论方程中引入了二次项，能够考虑重力沿弦向分量的影响，推导出绝缘子串绕其悬挂点转动的动刚度计算方法，通过动刚度理论研究连续档导线横向振动模态和频率，并应用有限元软件ABAQUS 验证理论模态和频率公式的准确性．所得结果表明，动刚度的计算方法具有较高的精度，理论模态与有限元输出结果吻合较好，同时获得的频率和模态可为山地高压输电线路防舞技术的研究提供依据．     

Two New Abietane Diterpenoids from the Roots of Tripterygium wilfordii Hook. f.

Two new abietane‐type diterpenoids, named triptobenzene R ( 1 ) and triptobenzene S ( 2 ), together with three known abietane‐type diterpenoids, triptophenolide ( 3 ), triptonodiol ( 4 ), and triptonoterpene methyl ether ( 5 ), were isolated from the roots of Tripterygium wilfordii Hook . f. Their structures and relative configurations were established by detailed spectral studies, including 1D‐ and 2D‐NMR (HSQC, HMBC, and NOESY), and HR‐ESI‐TOF‐MS, and by comparison with published data. Their absolute configurations were assigned by the CD technique, applied for the first time to abietane diterpenes from Tripterygium wilfordii. Compound 2 is the first abietane‐type norditerpenoid isolated from the genus Tripterygium.     

Crystal structures of azido or thiocyanato-coordinated nickel(II) complexes with tridentate Schiff bases

A new azido-coordinated nickel(II) complex [NiL¹(N₃)] (1) and a new thiocyanato-coordinated nickel(II) complex [NiL²(NCS)] (2), where L¹ and L² are the monoanionic forms of Schiff bases 2-[(2-isopropylaminoethylimino)methyl]-6-methylphenol and 2-[(2-dimethlaminoethylimino)methyl]-6-methylphenol respectively, are prepared and structurally characterized by elemental analysis, IR spectra, and single crystal X-ray crystallography. Complex 1 crystallizes in the triclinic space group P-1 with unit cell dimensions a = 8.812(2) Å, b = 9.433(3) Å, c = 9.488(2) Å, α = 81.933(2)°, β = 69.925(2)°, γ = 84.591(2)°, V = 732.5(3) ų, Z = 2, R ₁ = 0.0291, and wR ₂ = 0.0734. Complex 2 crystallizes in the monoclinic space group P2₁/n with unit cell dimensions a = 7.4497(4) Å, b = 6.1933(3) Å, c = 31.5126(18) Å, β = 92.484(2)°, V = 1452.57(13) ų, Z = 4, R ₁ = 0.0307, and wR ₂ = 0.0668. The Ni atom in each of the complexes is coordinated by three donor atoms of the Schiff base ligand and by one N atom of the azide or thiocyanate ligand, forming a square planar geometry. The azide and thiocyanate anions readily coordinate to the complexes as secondary ligands.     

A lead(II) sensor based on a glassy carbon electrode modified with Fe3O4 nanospheres and carbon nanotubes

We have developed a highly sensitive and selective sensor for lead(II) ions. A glassy carbon electrode was modified with Fe₃O₄ nanospheres and multi-walled carbon nanotubes, and this material was characterized by scanning electron microscopy and X-ray diffraction. The electrode displays good electrochemical activity toward Pb(II) and gives anodic and cathodic peaks with potentials at ?496 mV and ?638 mV (vs. Ag/AgCl) in pH?6.0 solution. The sensor exhibits a sensitive and fairly selective response to Pb(II) ion, with a linear range between 20 pM and 1.6 nM, and a detection limit as low as 6.0 pM (at a signal-to noise ratio of 3). The sensor was successfully applied to monitor Pb(II) in spiked water samples.

Theory of the magnon Kerr effect in cavity magnonics

We develop a theory for the magnon Kerr effect in a cavity magnonics system, consisting of magnons in a small yttrium iron garnet(YIG) sphere strongly coupled to cavity photons, and use it to study the bistability in this hybrid system. To have a complete picture of the bistability phenomenon, we analyze two different cases in driving the cavity magnonics system, i.e.,directly pumping the YIG sphere and the cavity, respectively. In both cases, the magnon frequency shifts due to the Kerr effect exhibit a similar bistable behavior but the corresponding critical powers are different. Moreover, we show how the bistability of the system can be demonstrated using the transmission spectrum of the cavity. Our results are valid in a wide parameter regime and generalize the theory of bistability in a cavity magnonics system.     

Liquid crystalline epoxy resin with improved thermal conductivity by intermolecular dipole–dipole interactions

To address tremendous needs for developing efficiently heat dissipating materials with lightweights, a series of liquid crystalline epoxy resins (LCEs) are designed and synthesized as thermally conductive matrix. All prepared LCEs possess epoxies at the molecular side positions and cyanobiphenyl mesogenic end groups. Based on several experimental results such as differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction, it is found that the LCEs exhibited liquid crystalline mesophases. When LCE is cured with a diamine crosslinker, the cured LCE maintains the oriented LC domain formed in the uncured state, ascribing to a presence of dipole–diploe and π–π interactions between cyanobiphenyl mesogenic end groups. Due to the anisotropic molecular orientation, the cured LCE exhibits a high thermal conductivity of 0.46 W m^?1 K^?1, which is higher than those of commercially available crystalline or amorphous epoxy resins. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 708–715     

Synergism of Interface and Electronic Effects: Bifunctional N-Doped Ni3S2/N-Doped MoS2 Hetero-Nanowires for Efficient Electrocatalytic Overall Water Splitting

The realization of water electrolysis on the basis of highly active, cost-effective electrocatalysts is significant yet challenging for achieving sustainable hydrogen production from water. Herein, N-doped Ni₃S₂/N-doped MoS₂ 1D hetero-nanowires supported by Ni foam (N-Ni₃S₂/N-MoS₂/NF) are readily synthesized through a chemical transformation strategy by using NiMoO₄ nanowire array growth on Ni foam (NiMoO₄/NF) as the starting material. With the in situ generation of Ni₃S₂/MoS₂ heterointerfaces within nanowires and the incorporation of N⁻ anions, an extraordinary hydrophilic nature with abundant, well-exposed active sites and optimal reaction dynamics for both oxidation and reduction of water are obtained. Attributed to these properties, as-converted N-Ni₃S₂/N-MoS₂/NF exhibits highly efficient electrocatalytic activities for both hydrogen and oxygen evolution reactions under alkaline conditions. The superior bifunctional properties of N-Ni₃S₂/N-MoS₂/NF enable it to effectively catalyze the overall water-splitting reaction.     

Resolving quantum dots and peptide assembly and disassembly using bending capillary electrophoresis

Despite the numerous techniques developed for the studying nanoparticle and peptide interaction nowadays, sensitive and convenient assay in the process of flow, especially to simulate the self‐assembly of quantum dots (QDs) and peptide inflow in blood vessels, still remains big challenges. Here, we report a novel assay for studying the self‐assembly of QDs and peptide, based on CE using a bending capillary. We demonstrate that the semicircles numbers of the bending capillary affect the self‐assembly kinetics of CdSe/ZnS QDs and ATTO‐D₃LVPRGSGP₉G₂H₆ peptide. Moreover, benefitting from this novel assay, the effect of the position on the self‐assembly has also been realized. More importantly, we also demonstrate that this novel assay can be used for studying the stability of the QDs–peptide complex inflow. We believe that our novel assay proposed in this work could be further used as a general strategy for the studying nanoparticle–biomolecule interaction or biomolecule–biomolecule interaction.